Search the forum,

Discuss 22mm Low pressure Check / non return valve, shower pump problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Jones82

Gas Engineer
Messages
221
Hi

Anyone know where you can get a 22mm low pressure non-return valve, it was suggested by Grundfos to combat the pump turning on when a hot tap is used...

I've already put a U in the pipework coming off the essex boss.

The pipe work is a little strange, it comes off the top of the cylinder, the feed to the hot taps goes up to the loft, vents, runs across the loft 6m then drops down to feed the rest of the house. The shower supply is separate to this, being feed from an essex boss on the cylinder.

I'm thinking of fitting the non-return on the supply to the pump... actually wouldn't it better on the hot supply to the taps?

Thanks
 
Status
Not open for further replies.

Reply to 22mm Low pressure Check / non return valve, shower pump problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
234
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
310
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock