Search the forum,

Discuss Advice on suitable thermostat and switch in the USA area at PlumbersForums.net

D

Deleted member 112484

I've an old (50yrs) oil boiler that is manually switched on and off using a light switch outside the boiler room. The only thermostat is the one built into the boiler. This is usually set fairly high and never touched. The light switch is use to switch on and off the boiler as heat is needed.

Ideally (to minimise the need for wires) I would like a freestanding thermostat that i can put into a room. When that thermostat reads "low" it will trigger the boiler to turn on.
Maybe this will require replacing the light with a receiver from the thermostat that will turn on and off the boiler. SO ideally the thermostat and receiver would communicate wirelessly,....
And if all my wishes were to come through I would be able to access the thermstat and switch on my phone

Are such gadgets / tech. available? If so, any recommendations would be much appreciated.
I'm UK based
 

Reply to Advice on suitable thermostat and switch in the USA area at PlumbersForums.net

Similar plumbing topics

Hi I'm having issues with my wireless Honeywell thermostat. It's sat in the living room, set at 18C currently. It makes my Worcester Greenstar 18Ri to short cycle. So, the moment it gets cold outside my boiler works for about a minute, then stops, and starts again in about 5 minutes, then...
Replies
36
Views
2K
I have bought an old house in rural France and it has an oil tank and Unical oil powered boiler (Italian I think). Its a beast of a thing but can't find any model info or any plates on it. I want to change the switch and thermostat to a digital wireless thermostat but I'm not sure what I can...
Replies
6
Views
594
I have a ideal logic 30 boiler ,the thermostat receiver looks to have died ( no lights on wired receiver ) I believe this need# replacing but in the mean time does anyone know if I can override the thermostat if heating is required please? the handheld thermostat is working it’s the boiler...
Replies
1
Views
806
Hi Guys I could do with some help here. I have tried search but no found an answer. We have just had a new boiler fitted which is a Vailliant Eco TEC Sustain, along with a Neomitis Thermostat. The tempreture on the theremostate is set to 20C the thermostat is dsiplaying the room tempreture as...
Replies
10
Views
1K
R
Thermostat and Programmer not communicating with Boiler. Both have been replaced. Any ideas? On the Glowworm boiler 18sxi I can use the CH controller to switch on/off the boiler, that works fine. Also upstairs i have a tank, when I switch that on I get hot water. But what else can I check...
Replies
2
Views
597
Deleted member 120897
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock