Search the forum,

Discuss Gateway into Plumbing at 39 years of age in the Plumbing Courses and Training area at PlumbersForums.net

Messages
1
Good afternoon, before I start I appreciate I may be on a hiding to nothing here but here goes. I spent time working as a tradesman with my Dad back when I was 16 but lacked the foresight to see it through, and ended up working in IT for the last 15 years. However, I've got to a point where I have zero passion for the job and there has been a desire to get a trade behind me and eventually operate my own business.

I've settled on plumbing as it appeals to my analytical mind, and appears to be a varied and interesting job. However, I'm under no illusions at all that this will take a lot of hard work and graft(something I am prepared to do!) but also need to couple this with realism and ask myself......am I too old to be considering it? I'm interested to hear of any success stories people have had entering this industry later on in life so that I can take some inspiration. The key questions I have are:
1) After an initial look at these fast track courses, it appears like they are a waste of money and I can see why in that you can't learn a trade in the time it says you can...it would be insulting to say otherwise. However, does anyone have any success stories of going on any of these courses?
2) If the fast track courses aren't any good.....at my age, what options do I have? In the ideal world I'd do an apprenticeship over a number of years but I my age, finances are going to come into play. Now I'm not saying I want to fast track anything, but are there other reputable options out there which I can do?
3) From my research so far(correct me if I'm wrong!) I'd need an NVQ Level 2 in order to operate as a Plumber.....however, should I be looking at any other courses prior to doing this, or would I jump straight into it?(I appreciate I'd need to work with someone in order to do this)
4) I'm prepared for the long haul with this one, and to put myself out there(unpaid) for a period of time as a plumbers mate so that I can watch, learn, ask questions etc. However, I want to make sure that alongside this I am also getting the qualifications I need.

Apologies for this being a bit long-winded.....I knew this wouldn't be easy and appreciate there is a lot of work that needs to go into these things, but at the moment it feels like whichever way I turn the door is firmly shut, so I'm hoping for some positive comments and inspiration.


Cheers

Andy
 
Those fast tracks are probably slightly better than nothing, but a lot more expensive.
Having you as plumbers mate "for free" is actually a significant cost for the plumber.
If you're in it for the long haul do a "proper" qualification ie. Nvq.
Good luck
 

Reply to Gateway into Plumbing at 39 years of age in the Plumbing Courses and Training area at PlumbersForums.net

Similar plumbing topics

B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
137
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
251
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
350
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
207
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
266
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock