Search the forum,

Fridge filter connection adapter

Post new thread

Discuss Fridge filter connection adapter in the DIY Plumbing Forum area at PlumbersForums.net

R

rafal_22

Messages
8
Hi,

I would like to connect up water supply to fridge.
Behind the fridge there is 15mm isolation valve installed however filter connector has got bigger size.
I assume I need some kind of adaptor from smaller to larger size.
Could someone advise what exactly do I need please?


Thanks
 
Washing machine valve
 
Or screw on something like this (looks like it might need a washer!)
windowcleaningwarehouse.co.uk

1/2" Female to 3/4" Male Threaded Adapter | Window Cleaning - Window Cleaning Warehouse Ltd

Female to Male Thread Adapter, adapting a 1/2'' female BSP thread to a 3/4'' male BSP thread. - 1/2" Female and 3/4" Male BSP Thread - Compatible with Series 26 Fittings - Nickel Plated Brass
windowcleaningwarehouse.co.uk windowcleaningwarehouse.co.uk

or screwfix version needing ptfe tape when you screw it on existing fitting
https://www.NoLinkingToThis/p/flomasta-bush-3-4-x-1-2-/98427
 

Reply to Fridge filter connection adapter in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
270
ShaunCorbs
ShaunCorbs
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
189
ShaunCorbs
ShaunCorbs
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
95
Sonya K
S
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
190
dreikher
dreikher
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
232
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forums UK
Tiling Advice
Tile Advice
British Standards in Tiling BS5389
TilersForums.co.uk | UK Tiling Forum - Est 2006
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock