Hi
I think I am suffering from a dry joint in the PCB as I have an intermittent fault where the fan sometimes keeps running when the boiler stops running. Pressing the reset button cures the problem.
I have read about newer PCBs are enclosed to stop this problem. So my question is if I take out...
Hi, I'm new to the site and have a problem with my Potterton Suprima 100L boiler, Its now about 14 years old and has been working fine, I changed the PCB control board about 6 years ago and not really had any problems with it. However in the last week the RED light has been locked on and I am...
I think I am OK to change from this but would like confirmation
Potterton Suprima 40 which I think is 11.7kw
The above has worked perfectly set at 20c the vast majority of the approx 14 years it has been installed
To a new install of a Worcester Bosche Greenstar 12ri
Our 3 bed semi detached...
Hello. Can anyone help / advise.
I have a potterton Suprima combi boiler. Just recently it has started making a really loud 'clicking' and banging
from the actual boiler, and then a very odd 'scraping' from the tank.
The boiler frequently cuts out, and has to be re set.
I had a plumber...
potterton suprima 80l 12 years old original pcb fully pumped system. Boiler temp setting just over half way. Seemingly random intermittent lockout , also random intermittent “knocking”. When working “normally” light sequence is as follows. Programmer on and heat called boiler fires solid...
I have a suprima which is causing me a bit of trouble. It was randomly locking out before and sometimes both LED's were going off on the original PCB. Whenever I went to look at it, it worked fine but my customer was just reporting when it failed etc. I replaced the PCB with the new upgrade kit...
Pls kindly advise likely cost, location central London, was quoted 120 pounds and am trying to see whether that's reasonable. Plus any good supplier/website to supply the board, preferably delivery overnight or in 1-2 days, much appreciated!!!! The PCB seems to be not good as third replacement...
about 6 months ago I looked at this boiler, customer said the pipes were banging and then cut out.
assumed pump was sticking, reset boiler turned on tested pump seemed ok, left it at that.
today had same issue, boiling and cut out. pump was 6m on setting 3!
all I had was a 5m so I fitted it...
Hi all
Keep having an intermittent fault on a suprima 40 its been going on for about 8 months the boiler well be fine for a while then out of the blue red light on and it needs resting.
I cant get it to do it in front of me and everything bells out ok and no kettling.
Any Ideas?
Hi all, I'm hoping somebody can help with a problem I'm having with the fan on a Suprima 80 HE.
I went to look at the boiler last Monday and diagnosed a faulty fan which I replaced. 3 hours later the new one was onthe blink again so another new one went in, after I had had a chat with potterton...
Customer has a Potterton Suprima 70L and wants to instal a megaflow to boost hot water pressure.
How do i find out if this boiler can be used with an unvented cylinder & also would the heating circuit have to be pressurised as well with a megaflow rather than vented and pumped as it is now ...
DomC
Thread
boiler
central heating system
circuit
cylinder
find
pottertonpottertonsuprima
pressurised
suprima
unvented
afternoon
im getting water hissing noises from my potteron suprima 40l. sometimes the boiler goes into lockdown (red flashing light)
so i was wondering if this was likely to be a water pressure issue?
ive already had the water pump replaced and a new myson power extra was fitted about a...
Hi all,
I am new to the forum and I have a problem with my Potterton Suprima (not sure if there is a model number or anything you may need to help), in that the central heating works perfectly, we had an issue with the hot water actuator valve, which I have since replaced thinking that this...
eccy
Thread
actuator
changed
heating
hot
hot water
no hot water
pottertonpottertonsuprimasuprima
system
water
Thanks to all those who offered advice on this. Spoke to a couple of experts - problem caused by the :nono:. Was told that if the :nono: doesn't work, nothing will. After :nono: all good.
Hi All,
My Potterton Suprima fan in the boiler is making a bit of noise which I can now hear in the living room, my thoughts are that it's probably clogged wit dust and needs some spray on grease on the bearing to quieten it down. Am I aloud to do this my self or only a gas fitter ? If I am OK...
jumbopants
Thread
advice
fan
noisy
please
pottertonpottertonsuprimasuprima
Evening chaps wonder if you can help me
Was called out tonight to look at one of these boilers. Boiler would not light.
Traced to a goosed aps. Happen to have one on the van for a job tomorrow so replaced it.
Now boiler will only light with the cover off. I am leaning towards fan also being...
I've booked up a few of these where the terminal has rotted away, but have never returned to fit it.
Potterton don't do a remedial kit for this flue so I've had to order the complete flue.
Has anyone changed just the inner flue tube?
My
http://m.youtube.com/watch?v=EXvE9z4JX9o had a suprima doin the exact same as this anyone had it? It's the new board so don't think its that I'm thinking air pressure switch but wondered if anyone had the same?
This system in hot water only seems to create lots air which I cannot get rid of. I have put air vents on both the flow and return connections on the coil but they don't help. The air seems to come round every minute or so and you will hear it really loudly. But what might be the cause is the...
Just visited a boiler where ignition and gas were not being energised, fault finder shows replace APS, but having done that the fault remains. Fan starts when calling for heat, but no other action, boiler does not go into lockout, after 3 attempts just keeps trying and failing. No wiring loom...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.