Search the forum,

, spot the deliberate error

Discuss , spot the deliberate error in the Gas Engineers Forum area at PlumbersForums.net

:D seen that as well guess someone installed then forgot to remove and drill
 
Boiler noises scaring people to death don't usually happen with a blocked condensate drain.
With the ineptitude of the installer re: the condensate drain, I woud love to see pics of the boiler installation
 
Unbeleivable.
But, seen it once on a blowoff from an undersink we were removing!! I'll try and find pics.
 

Reply to , spot the deliberate error in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

abc_plumb
E133 Error Potterton Titanium 24
Hiya fellow gas engineer. Need some help on this boiler fault. Went out to this E133 Error on a Potterton Titanium 24 (GC: 47-393-39) I checked the inlet standing pressure which was at 25mb. Boiler attempts to fire and the pressure drops by 1mb but the gas valve doesn't open. Checked the black...
Replies
9
Views
409
ShaunCorbs
ShaunCorbs
C
baxi duotec e50 boiler error
Hi, I'm hoping someone here may be able to help me out with an issue I have with my baxi duotec boiler. Basically, the hot water temperature has been fluctuating quite alot, dropping in temp then raising again whilst showering. I have had an engineer out who has changed the thermistor, but I am...
Replies
5
Views
406
cjg
C
N
Viessmann 100-w 30kw - Constant noflame @ start error (immed resolved)
Have this boiler since last November and have given up on the installer and have another person coming this week. Supplier here in Ireland came out and said there was an issue with the flue install (it's in the attic and exits through the roof close to the chimney). Old installer who has done...
Replies
0
Views
460
noxyireland
N
W
Ideal Logic Combi 35
Hi all, I've got a bit of a strange issue relating to my Ideal Logic Combi 35 which has recently started displaying a F2 error when trying to use the central heating system. The boiler works fine when using hot water, however when I try to turn on the central heating system the boiler works...
Replies
2
Views
952
Williams25
W
M
Help needed on Ideal Logic Heat 15 System Boiler showing F3 error code
Ideal Logic Heat 15 System Boiler Hi. Just started to get an F3 Fan Fault on this boiler. On power up there seems to be a quiet thump from somewhere then it goes through the start up sequence. It spends a few seconds on the ‘c’ display before coming up with the F3 error code. Can anyone advise...
Replies
1
Views
923
Deleted member 120897
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock