Search the forum,

Discuss Single room Air con advice appreciated in the Plumbing Jobs | The Job-board area at PlumbersForums.net

64degrees

Gas Engineer
Messages
48
Hi all, been asked by a client to install aircon in a single room in their house. There’s a loft space above and ideally the unit would be wall mounted externally and ducted into the loft, with a ceiling grill in the room.
Thinking about getting a Daikin/Mitsi Rep out to spec it, keen to hear what you guys have done in a similar situation. Is there a renewable approach like an air source heat exchanger?Jobs in Oxfordshire if anyone local wants to quote.
 
Last edited:
Thanks Gasmk1 - think I’ve seen similar to help recirculate air to cure damp in rooms.
Don’t really want to bolt a unit on the wall - I’ll have a look and see if it can be ducted into the room. You know what it’s like these days customers want everything hidden!
 
Premiair Wall Mounted Twin Duct Air Conditioner with Electrical Heater (10000 Btu/Hour) - EH0533 aboyt £800

XPELAIR WHP245 DIGITEMP AIR CONDITIONING AND HEATING abot £1600
 
us
Thanks Gasmk1 - think I’ve seen similar to help recirculate air to cure damp in rooms.
Don’t really want to bolt a unit on the wall - I’ll have a look and see if it can be ducted into the room. You know what it’s like these days customers want everything hidden!
ed one in my wifes studio in last house it was pretty good
 
Did this one last year in a loft office bit noisy if I am honest but pulled the temperature down well and can be used for heating in winter has a remote control . Kop

20180801_154804.jpg


20180801_131707.jpg
 

Reply to Single room Air con advice appreciated in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
306
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
158
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock