Search the forum,

Discuss Need advise for apprenticeship Interview with Centrica in the USA area at PlumbersForums.net

Messages
5
Hi all.

I have an interview for a gas apprenticeship with Centrica next Tuesday.
I have prepared using the STAR method and the values on the Centrica website but what else could I do impress the interviewers.

If anyone has worked with British Gas in the past please do give me your experience and what they want from their apprentices
 
I have an online assemment this week to do, any chance anyone has done one of these 1 hour long tests for Centrica before? I assume its a standard test that ask similar questions to the CCN1, CENWAT and CPA1. Anyone have any advice?
 
I have an online assemment this week to do, any chance anyone has done one of these 1 hour long tests for Centrica before? I assume its a standard test that ask similar questions to the CCN1, CENWAT and CPA1. Anyone have any advice?
Don’t stress about it. It’s to catch out the chancers, you either know enough or not.
 

Reply to Need advise for apprenticeship Interview with Centrica in the USA area at PlumbersForums.net

Similar plumbing topics

Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
175
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
276
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
379
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
145
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
123
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock