Search the forum,

Discuss kitchen radiator luke warm. need advice please. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rubypolly

My kitchen is an extension built before we moved in. We had a new radiator installed in there when we had a new combi boiler fitted 2 years ago along with new radiators in the rest of the house. This radiator is hot at the top warm in the middle and cold atthe bottom. The pipe leading to it is red hot. When we turned the rest of the radiators off this radiator became hot. When we turned all the radiators back on the kitchen one went to being luke warm again. I understand it's probably the last one on the run but surely with a combi boiler this shouldn,t make a difference? Please can anyone help, I'm fed up of a cold kitchen! Thankyou.
 
Needs balancing, should have been balanced when new rads installed. If you do a search plenty of threads on here cover it. If not confident bring in a pro to sort it for you. Good luck and welcome to the forum :)
 
:welcome::iagree:Sound advice Rubypolly from a guy who knows and welcome to the forums regards turnpin
 
Like SimonG says hopefully will just need balancing. What size pipes feed the rad?
 
Status
Not open for further replies.

Reply to kitchen radiator luke warm. need advice please. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
75
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
374
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock