Search the forum,

Discuss Hot water temp in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

duarab

Hi, what temp should hot water be set to on combi boiler? also if the flow is to high for the requested water temp does turning up the temp settings have any effect or does the boiler automaticaly use full power to try and achevie the temp? my boiler is a ideal combi logic+
 
adjust it to comfort - the boiler will automatically adjust to the flow rate. well should do.
 
Do not forget that the you may need to adjust things in the winter when the water off the cold main is significantly colder and the bioler
requires a temperature lift beyond the boiler capacity for a given flow rate.

centralheatking
 
Do not forget that the you may need to adjust things in the winter when the water off the cold main is significantly colder and the bioler
requires a temperature lift beyond the boiler capacity for a given flow rate.

centralheatking

not saure what you mean by this
 
Status
Not open for further replies.

Reply to Hot water temp in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
167
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
206
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
201
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
113
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock