Search the forum,

Discuss Hot Water Issue. Dual Valve System in the USA area at PlumbersForums.net

Messages
5
Hi All

I have an issue with my hot water.

I have a gas boiler situated next to a hot water cylinder fed from a water tank in the loft.

There are two separate valves one for the heating and the other for the hot water. (No 3-Way Valve)

Both valves open when asked to via the controller (Hive System) however I only seem to be able to get hot water when the both the heating and the hot water is requested.

When the hot water is requested without the heating the valve opens but the boiler doesn’t fire up.

Any help would be greatly appreciated.
Jack
 

Reply to Hot Water Issue. Dual Valve System in the USA area at PlumbersForums.net

Similar plumbing topics

Background 24 apartments are equipped with thermal stores of (100 to 150 litres) with immersion heater capability. Individual demand of each apartment for domestic hot water varies greatly in timing and volume. Thus the oil boiler is required to work for long periods which is uneconomical...
Replies
4
Views
269
I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is...
Replies
4
Views
571
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air gap as I was having dripping from the pressure relief valve. Since then I've lost a lot of pressure from the hot water feed to my shower. The rest of...
Replies
8
Views
262
So a strange conundrum regarding water temp if anyone can help resolve, would be much appreciated. Ive tried to give as much info as possible to give a full picture but let me know if ive missed anything. I have a Baxi Avanta 25h heat only boiler. Works fine. Unvented 300ltr megaflow. Stated...
Replies
1
Views
146
Hello everyone, I'm facing a rather complex situation and I need your expert advice. My neighbor and I share a boiler for hot water, and we have a single recirculation pump serving both of our homes. However, after the pump, the recirculation circuit splits into two separate branches, each...
Replies
1
Views
256
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock