Search the forum,

Discuss Help with qustions! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

Nighthawk

HI, guy's could you please help me with the following?

What is the longest 90-degree flue bend?

If you were authorized to adjust a domestic gas regulator and were unable to adjust the regulator to the correct pressure what steps would you take?

Many thanks
Trevor.
 
Hi
Are you gas safe registered?

There's no advice to non registered installers on this forum. Got obvious reasons.
 
Hi
Are you gas safe registered?

There's no advice to non registered installers on this forum. Got obvious reasons.

training i think
 
Hi
Are you gas safe registered?

There's no advice to non registered installers on this forum. Got obvious reasons.

training i think
 
Hiya Chalked,

And I'm 99.99 gas registered finished my portfolio and final exams in progress.
It's just that I had these two questions on my exam paper.
I was just wondering if you came up with the same answers as I did.

Trevor
 
1 depends on boiler

2 phone gas network up and get them to replace reg
 
And that's all we can tell you.

We don't discuss gas in open forum. Training or not.

Please read the forum rules.
 
Status
Not open for further replies.

Reply to Help with qustions! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, came across this old push fit waste pipe. Stripped out the old shower and it was a 40mm waste pipe siliconed in the fitting. The fittings at floor level so I’d be looking to bend (90 degrees) straight away so I can get the lowest possible shower tray. Could someone advise what I could...
Replies
3
Views
541
T
Please advise me. I am a disabled pensioner. I had a wet room fitted just over a year ago using a local authority grant. Builder was employed by local authority. I had no say in who carried out the work. I have called the builder out under the guarantee several times for water leaks. The shower...
Replies
0
Views
261
TheCatWhoNeedsaHotShower
T
Hi everyone, New here & my first post! I have a Worcester greenstar 24i, it is a conventional boiler, it has a water tank upstairs. For the past year the hot water when turned on was intermittent. I repressurised the expansion vessel to 1 bar and the hot water switch when turned on worked...
Replies
26
Views
2K
About 10 months I started having issues with a gas like smell in my home and the gas board was unable to find any gas leak I've still got the issue. When I first made contacted enviromental health I was told the following Could be my drains and to have my drains checked. Could be the sewers...
Replies
10
Views
784
Hi All, I need your advise as I'm really concerned here. I only just had regular boiler replaced with combi (Vaillant ecoFIT Pure 25kw). I had few surveys done and everyone stated the gas supply pipe from the meter to the boiler must be changed from current 15mm to 22mm. The plumber I used said...
Replies
10
Views
2K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock