Search the forum,

Discuss HELP WITH FEW RAD PLUMBING in the USA area at PlumbersForums.net

Messages
13
HAVE HAD THE PIPEWORK CUT ON 1 SIDE OF THE OFFICE

SEE PICTURE


IM LOOKING TO RECONNECT UP THE 2 PARTS AS THE PIPE WITHOUT THE CAPS HAS A RADIATOR INTO A BATHROOM

1- PIPES WITHOUT THE CAPS DONT AND WONT HAVE ANY WATER IN AT THE MOMENT BUT SURELY IF I USE COPPER OR FLEXI PIPE THE PIPE WITH 2 WHITE CAPS IS MAIN WILL BE PUDDLES OR NOT

2- RADIATOR IN THE BATHROOM HAS NO WATER AND LOOKING TO REPLACE OR USE IT
THIS IS AN OFFICE SO NOT REALLY BOTHERED BUT IS A BIT RUSTY AND HASNT BEEN USED FOR A COUPLE OF YEARS
BUT THE RADIATOR IS APPROX 470-480MM AND A 500MM IS CLOSEST TO GET.

SORRY IM 2 TIGHT TO GET A PLUMBER IN AS I DONT OWN THE PLACE AT 400 POUND TO DO THE WORK
 

Attachments

  • RAD PIPE.JPG
    RAD PIPE.JPG
    132.8 KB · Views: 16

Reply to HELP WITH FEW RAD PLUMBING in the USA area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
177
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
214
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
308
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
388
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock