Search the forum,

Discuss Grant Vortex Air Boiler in the Oil and Solid Fuel Forum area at PlumbersForums.net

SimonG

Esteemed
Plumber
Subscribed
Messages
21,054
Anybody had any experience with a grant vortex air? Apparently a grant blue flame heat only boiler linked to a air source heat pump.

Customer wants one!
 
I'm going to ask some fellow engineers on their thoughts. Bare with me for a while.
[automerge]1592855257[/automerge]
Not much feedback yet mate. The primary concern I have at the moment is is this a new build or retro fit? The latter would require sound insulation throughout the property.
 
Last edited:
The problem with any heat pump is the insulation in the property must be adequate, else you're chucking power in but getting very little back and in this case the PJ will be called upon more often to compensate. My understanding with these units are the system should be designed and installed properly with the PJ only coming on during extreme circumstances, the heat pump should be able to maintain heat emissions during normal operation, apart from when charging a HW cylinder which obviously requires higher flow temperatures
 
I have my doubts about the set up. I'd much prefer a hounsfield heat only and a 210 litre unvented cylinder. Like you say, what's the point of a heat pump that needs topping up with a 26kw oil boiler.

Theres a lot of work to do in the place.

It's an old farmhouse that was done up about 25 years ago. Little insulation, big open plan kitchen diner that used to be the cow byre.

Scope of works is

the boiler side, all new rads and pipework.
Downstairs bathroom to be fully stripped and converted to wet room with roll top bath.
Upstairs shower room.
Separate upstairs cloakroom.

Also all ground floors currently quarry tiles and has wanting yorkshire stone. I'm thinking underfloor but dont know if he will be convinced.

Then builder in for all new doors and windows
Then new kitchen.

He's moving out whilst it's all done.

Basically he's just retired and it's just been somewhere to sleep and wants it all bringing upto date.
 
Why not oil boiler with buffer tank and unvented cylinder. Adequate sized cylinder and buffer tank fed by boiler, you can then implicate weather compensation.
 
Why not oil boiler with buffer tank and unvented cylinder. Adequate sized cylinder and buffer tank fed by boiler, you can then implicate weather compensation.
No space for a buffer tank, going to be a squeeze to get an unvented cylinder in. Well not from what I saw, but might be something to look at.

Currently running a 25 year old heat slave.
 
Once he given you an idea of what he wants, go though all the options and relative pros and cons with him.
Unfortunately for modern day systems some sort of space is needed to accommodate everything, id hate to hear from you he settled on another combi 😂
 
Once he given you an idea of what he wants, go though all the options and relative pros and cons with him.
Unfortunately for modern day systems some sort of space is needed to accommodate everything, id hate to hear from you he settled on another combi 😂

No way he's getting a combi, not from me anyway 👍👍
 

Reply to Grant Vortex Air Boiler in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
256
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
172
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
203
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
359
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock