• Welcome to PlumbersLive.com - Please register for free, or login if you have an account here already. We have relaunched the forum with new forum software and a nice new feel to it. Find common questions related to Boilers, Central Heating, Gas Engineering, Water Plumbing, Bathroom and Kitchen Remodeling - all in our forums.

F1 Problem on an Ideal logic 24 combi

Status
Not open for further replies.
Hi

My ideal boiler (24) was fitted as a used swap (from a 35) a few weeks ago and the engineer is now ignoring me.

It shows F1 and when I top it up (to 1 bar) it works fine for a couple of hours.

It then spits water outside to release the excess pressure I guess, then it shows F1 and I refill to 1 bar

There are no other leaks.

I would appreciate feedback please.

thanks
 

ShaunCorbs

Staff member
S. Mod
Plumber
Gas Engineer
if its new get ideal out also if its spirting out side thats not good dont put any more water in eg refill
 

scott_d

Plumber
Gas Engineer
You need to get a gas safe engineer out to look at it.
(Probably best not to use the person who fitted it)
 
Status
Not open for further replies.
Top