Search the forum,

direct hot water cylinder

Discuss direct hot water cylinder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

pauls

can you still get the cylinders with the cold water storage feed incorporated on top?

been out this afternoon to look at replacing one (the wooden platform it was stood on collapsed and everything is wrecked) the system is well old and no central heating just the hot water off the cylinder.
 
Yes you can its called a combination cylinder, any decent plumbing merchant will help you out.
 
Seen one on the Toolstation web site, I think it's manufactured by RM
 
Go to merchant tomorrow you can still get them no problem, (they aint cheap though, price of copper etc)
 
Maybe cheaper putting in a direct un-vented, if water supply is up for it
 
found them on citys web site and yep they are pricey. just toying with the idea would it be cheaper to get a normal direct cylinder and sick an f&e tank in above it.
 
Status
Not open for further replies.

Reply to direct hot water cylinder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
0
Views
44
Filthbags
F
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
174
John.g
J
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
271
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
49
Splitty
S
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
57
fowlerboi
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock