Search the forum,

Basin tap - Armitage Shanks Sensorflow Solo S8135AA

Discuss Basin tap - Armitage Shanks Sensorflow Solo S8135AA in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I

ISS_Ian

Hi there
Sensorflow tap.jpg

I have a few of these taps at work and one is very intermittent and sometimes comes on on its own. I have taken the cover off the control box and there is a green led flashing away. The red one comes on when the solenoid valve clicks on. Quite often I can put my hand near the sensor and nothing happens, the green led still flashes but the red led doesn't come on. Do I need a new tap or just the control box. Is there any other fault finding I can try ?

Thanks
 
Status
Not open for further replies.

Reply to Basin tap - Armitage Shanks Sensorflow Solo S8135AA in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
229
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
228
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock