Search the forum,

Discuss Average hourly rate for a gas safe plumber in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
910
At present what is seen as the average or decent rate for a gas safe plumber employed be someone?
 
At present what is seen as the average or decent rate for a gas safe plumber employed be someone?
Depends on a lot of factors mate. Where you are location wise. What job you are doing. How long you have been doing it. How old you are and without sounding funny how good at doing it you are.
 
As above but anywhere from 25-65 depending on where you are, clients and competitors
 
Rule of thumb is 25% of what the employer can charge you out for per hour, that's why they keep us busy 8hrs a day :mad:
 
Down here it is ÂŁ15 to ÂŁ17.50 a hour + ot and callout allowance , depending on age and experience, holiday pay , mobile phone and a van , supplied.
 
Status
Not open for further replies.

Reply to Average hourly rate for a gas safe plumber in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
354
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
225
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
390
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
228
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock