Search the forum,

compatible

IBM PC compatible computers are similar to the original IBM PC, XT, and AT that are able to use the same software and expansion cards. Such computers were referred to as PC clones, or IBM clones. The term "IBM PC compatible" is now a historical description only, since IBM no longer sells personal computers. The designation "PC", as used in much of personal computer history has not meant "personal computer" generally, but rather an x86 computer capable of running the same software that a contemporary IBM PC could. The term was initially in contrast to the variety of home computer systems available in the early 1980s, such as the Apple II, TRS-80, and Commodore 64. Later, the term was primarily used in contrast to Apple's Macintosh computers.
These "clones" duplicated almost all the significant features of the original IBM PC architectures. This was facilitated by IBM's choice of commodity hardware components, which were cheap, and by various manufacturers' ability to reverse engineer the BIOS firmware using a "clean room design" technique. Columbia Data Products built the first clone of the IBM personal computer, the MPC 1600 by a clean room reverse-engineered implementation of its BIOS. Other rival companies, Corona Data Systems, Eagle Computer, and the Handwell Corporation were threatened with legal action by IBM, who settled with them. Soon after in 1982, Compaq released the very successful Compaq Portable in 1982, also with a clean-room reverse-engineered BIOS, and also not challenged legally by IBM.
Some early IBM PC compatibles used the same 8-bit computer bus as the original PC and XT models, but many soon adopted the 16-bit IBM AT bus. It was later re-named the Industry Standard Architecture (ISA) bus, after the Extended Industry Standard Architecture bus open standard for IBM PC compatibles was announced in September 1988 by a consortium of PC clone vendors, led by Compaq and called the Gang of Nine, as an alternative to IBM's proprietary Micro Channel architecture (MCA) introduced in its PS/2 series. Soon after the industry adopted new bus standards in a similar, cooperative way; the VESA Local Bus (VLB), Peripheral Component Interconnect (PCI) and the Accelerated Graphics Port (AGP).
Descendants of the x86 IBM PC compatibles, namely 64-bit computers based on "x86-64/AMD64" chips comprise the majority of desktop computers on the market as of 2021, with the dominant operating system being Microsoft Windows. Interoperability with the bus structure and peripherals of the original PC architecture may be limited or non-existent. Many modern computers are unable to use old software or hardware that depends on portions of the IBM PC compatible architecture which are missing or do not have equivalents in modern computers. For example, computers which boot using Unified Extensible Firmware Interface-based firmware that lack a Compatibility Support Module, or CSM, required to emulate the old BIOS-based firmware interface, or have their CSMs disabled, cannot natively run MS-DOS since MS-DOS depends on a BIOS interface to boot.
Only the Macintosh had kept significant market share without having compatibility with the IBM PC, although that changed with Intel Macs running OS X, often dual-booting Windows with Boot Camp. More recent computers, including M1 Macs and Chromebooks are turning to ARM-based, especially 64-bit ARM64 CPUs.

View More On Wikipedia.org
  1. M

    Mixer mixer shower, compatible with tanked supply

    Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
  2. T

    h/w cylinder compatible with future heat pump system?

    Hi We urgently need to get our h/w cylinder replaced because it's leaking. Our current system is oil boiler feeding underfloor downstairs, radiators upstairs and an unvented hot water cylinder for hot water. We are thinking of moving to a heat pump at some point but aren't ready to do this. My...
  3. M

    Roca Compatible Flush Plate

    I have 4 Roca dual flush plates with mechanical 2 red wire valves behind them. The only option seems to be to replace with their single option c£50. As all 4 have broken in exactly the same way as have most people who live on our estate I am loathed to keep buying them. Does anyone have any...
  4. B

    Compatible flush plates with Geberit UP720 (8cm)

    Hello all, We have a Geberit UP720 frame. The frame says depth 8cm. (There's also the UP320 frame, which I guess is 12cm.) We are looking at Geberit flush plates, e.g., Sigma10. Sometimes we read that UP720 is compatible with Sigma flushplats. However, sometimes flush plats are also advertised...
  5. A

    LP722 Controller, is there a wifi compatible option?

    I have a Drayton (lifestyle)LP 722 7 day controller for Central heating and Hot Water Is there a near similar product that can be controlled by wifi?
  6. J

    Eurocone Cone Angle - BSPP 60deg Compatible?

    Hi! I am creating a cooling installation and would like to use manifolds supplied by an underfloor heating company. It seems as though UFH uses Eurocone widely but I have never come across these fittings before. Can someone tell me the cone angle on eurocone fittings and whether they are...
  7. S

    Are all 90mm shower wastes compatible?

    Looking at using the Mira Flight Safe shower tray, which comes with a badged Virquin Twisto 90 trap. Just checking the reviews for this trap and they are generally terrible and so I am considering alternatives, as there is no possible adjustment in piping once the tray is plumbed in i.e. if I...
  8. M

    ASHP not compatible with existing CH (cast iron) pipework?

    Hello, We were due to have an air source heat pump installed on a grant scheme on Monday, with radiator size upgrade, but retrofitting using the existing pipework. The calculations have been done to show it's viable etc... However their engineer has just (!!) looked at the photos taken by the...
  9. P

    Bath Shower Mixers - are heads, rails etc from different brands all compatible?

    Hi folks Trying to choose a bath mixer shower... I've found some I like, but I don't tend to like the slider rails from the same brand. My favourites are these: Shower mixer: https://www.homesupply.co.uk/Francis-Pegler-Sequel-Pillar-Mounted-Bath-Shower-Mixer-Tap-with-Shower-Kit Slider...
  10. P

    Solar compatible cylinder Gledhill SunSpeed 2 Open Vented Indirect Twin Coil Solar Cylinder

    Hello I had a solar thermal installation. However, the Gledhill Stainless Steel Lite keepings making popping noises. Anyway, I was looking to have it replaced with another cylinder and found this one: Gledhill SunSpeed 2 Open Vented Indirect Twin Coil Solar Cylinder | Vented Cylinder -...
  11. H

    Replacement for CM921 - Alexa compatible

    Hi, I'm looking for some advice please. The temperature up button on my parents thermostat CM921 has been become very unresponsive and so the temperature can't be changed. I'm wondering about getting a replacement, but going for a voice controlled one using Alexa. So what is the...
  12. P

    CWS float valve: part1/2 compatibility

    Tonight the arm of the ballcock feeding the cold water storage cistern in my attic broke (quite puzzling: maybe due to strong wind causing some turbulence??). Anyway, I need to replace it. I know it's faster to replace only the part inside the tank, undoing the very last compression nut. But...
  13. B

    Baxi 200 compatible with hive smart thermostat?

    Hi there, couple of questions. 1. Is the hive smart thermostat compatible with a baxi 200.combi boiler? 2. Is the hive smart thermostat compatible with the baxi duo tec 24? 3. In terms of quality and performance what are the differences between the baxi 200 and duo tec? 4. What is the best...
  14. gmartine

    Vaillant compatible wireless receivers?

    Anybody else make a non Vaillant facia type receiver 'cept Salus?
  15. B

    Old plastic/ rubber pipe and compatible fitting?

    Hi, a stopcock has seized and I need to replace it but the pipe is an unusual rubber/ plastic material. It’s approximately an inch ID. Has anyone got any advice for replacement compatible fittings? Will it need inserts etc? Thanks in advance and some pics below.
  16. M

    Nest with oil combi compatible?

    I wired up a nest with an oil combi and whilst the heating side works fine is the hot water side compatible? It seems to me that it doesnt work with an oil combi so I just turned it off. Am i right or wrong.
  17. B

    Compatible gas control valve for obsolete Honeywell

    After the success of yesterday's posting, and the constructive support I received I wonder if I could please test the skills of the wise again, as today I've a problem of my own to resolve. I called out a gas engineer this morning because our boiler, an elderly Ideal Concord CX 240 P, has...
  18. S

    Wi-Fi thermostats compatible with JG WWC and Salus RT500RF

    hi. Just moved in to a new home with 4 zones (3 underfloor and 1 radiator zone) I have JG RF thermostats a salus RT500 and JGWWC. I looked at replacing it with Honeywell Evohome but was quoted over £1,700 for the control system and TVR’s. is there a Wi-Fi compatible thermostats that can do both...
  19. P

    IBP conex compatibility question

    Is IBP conex CUPREX compatible with John Guest Pex pipe
  20. T

    Glow-Worm Betacom 3 & Nest 2nd Gen

    Hi all, Had a new boiler fitted a few weeks ago and I've been dipping in & out of attempts to reconnect the pre-existing Nest G2 I had used with the old boiler. I can't seem to get them to talk to each-other. Is the glow-worm's e-bus interface different to what the Nest uses, or my old boiler...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock